All Objects In All Collections: Objects 436 - 450 of 612

2013.18.1: Shaman's StaffShaman's Staff, c. 1935 Carved cedar ceremonial Shaman's staff consisting of a rounded loop handle and a long thin slat. Along the length of the staff is a carving of a canoe and sea snake. A nail has been used to hold the head of the sea snake in place. ‘1935’ is carved into the back surface of the staff.
993.1178.1: Shears, PlasterShears, Plaster, 20th Cent. STILLE plaster shears for 2 hands. Bulb handles, lower blade fits into upper casing formed by two narrow edges joined to make rectangle. 'TRUDELL CHROME' and 'MADEINGERMANY' stamped into handle shaft.
993.1177.1: Shears, PlasterShears, Plaster STILLE's plaster shears for 2 hands. Bulb handles, lower ridged blade fits into upper casing, formed by two narrow edges joined to make rectangle. 'SKLARCHROMEUSA' stamped into handle shaft, '36' stamped into lower blade and '36 S' at opening of hinge. Bolt missing.
998.9.12: SigmoidoscopeSigmoidoscope, 1941-1960 A rectal speculum consisting of a cylindrical outer tube with an attachment for a light fitting and an obturator with a tapered tip. The outer tube is calibrated in inches [1-8] along the underside surface. Manufacturer's name 'MILLER SURGICAL' stamped into outer tube surface.
2005.23.1: Sigmoidoscope SetSigmoidoscope Set, c. 1957 Sigmoidoscope set in case. Consisting of 30cm and 25cm sigmoidoscopes, inflating bulb, power unit, optic eye piece with lamp, transilluminator cord with 2 separate cord tips and lamp in socket connection and 3 spare lamps. A small metal plaque with manufacturer's details is pined to inner lid surface. There is Elastoplast tape with owners name written in ink on lid top and front edge. The outer tubes of the sigmoidoscopes are calibrated in centimeters and the obturator tips are tapered. 'MADE IN ENGLAND ALLEN & HANBURY'S LTD' is stamped into the outer tube of the larger sigmoidoscope and...
993.665.1: Skeletal Left Foot Skeletal Left Foot , 20th Cent. Skeletal left foot. Bones held together with wire, metal springs and elasticated cord.
2006.465.1: Skeletal Model, Foot and AnkleSkeletal Model, Foot and Ankle Skeletal model of a foot with removable lower section of connecting tibia and fibula.
2006.466.1: Skeletal Model, Right HandSkeletal Model, Right Hand, 1970-1985 Skeletal model of a right hand and wrist slotted into base stand. 'Tandearil®' and 'Geigy' printed on surface of base [Tandearil® was an anti-inflammatory drug used to treat arthritis and bursitis marketed by Ciba-Geigy, withdrawn from International market July 1985].
993.664.1: Skeletal Right Foot Skeletal Right Foot , 20th Cent. Skeletal right foot. Bones held together with wire, metal springs and elasticated cord.
995.4.16: Skin Section ModelSkin Section Model, 1900-1940 Painted numbered teaching model [plaster over wooden core] of magnified cross section of skin - sweat gland flanked by 2 hair follicles. 3 tiers connected with side hinges on wooden base. Removable skin section in middle tier dermis to expose vessels. Round metal disc with manufacturers name and address nailed onto base.
993.624.1: Slide ProjectorSlide Projector, 1943-1945 Cased Model D Delineascope, serial no. 86873., with electrical cable and spare boxed lamp. The apparatus is fixed onto a stand with corner rubber supports. The lamp box consists of a hinged casing, a 500Watt 120 volt clear lamp, reflector concave mirrored disc and two condensing lenses. The bellows with telescopic lens [projection objective] can be moved towards and from the slide holder by means of supporting slide rods. For 3 " x 4" glass slide projection. Glass slide holder attachment and lens cap missing. Fully extended projector dimensions given.
995.4.139: Slide ViewerSlide Viewer, 1901-1950 Electrical glass slide viewer. Solid stand with movable light source and lens, and mirror housing. The insitu lens casing can be adjusted by a lever, whereas the screw-in lens can be removed. The rectangular mirror can be removed and has a cover. The slide is held in an upright stage with 2 stage clips either side. The power unit consists of coils within a perforated cylinder housing with 2 electrical cords. 1 leading to the lamp source with 'BRYANT 660W 250V MADE IN U.S.A.' engraved into the lamp holder and a 'GE' lamp screwed in place. The second lead, with a plug, is attached to 2...
993.927.1: Slit Lamp MicroscopeSlit Lamp Microscope, 1930-1950 A slit lamp and microscope on a semi-circular shaped glass-topped table with three legs. The lamp housing is attached to the table frame on an adjustable upright column and is mounted on a jointed swivel-arm, and supported on a long arm. Along the arm next to the lamp housing is a diaphragm-tube to cut off redundant light and has a fitting to hold colour-filters. At the far end of the arm is a focusing lens in a frame, which can be racked horizontally to and fro and vertically up and down by means of a screw/fitting underneath. A chin/forehead frame unit with a tilting mechanism and white...
993.1184.1: Snare WiresSnare Wires Envelope containing 11 staple shaped wires. Printed on envelope " 1 doz. #3722, CUT SNARE WIRES, gauge 6, F. Dittmar & Co., Inc. Phila..U.S.A." One wire missing.
993.1172.1: Snare, TonsilSnare, Tonsil, 1901-1950 EVE tonsil snare without ratchet, with 2 finger rings attached to shaft and thumb ring at the top. Snare wire not attached. 'KNY-SCHEERER GERMANY', and 'R5' stamped into thumb ring and trademark [serpent entwined around a staff with crown] is stamped into finger ring attachment.